phone  

CONTACT US

TEL: + 44 (0)1923 606 600

This email address is being protected from spambots. You need JavaScript enabled to view it.

 

 

home  

OPENING HOURS

Mon-Fri 08:30 - 17:00

 

 

 

Spin on Range

The WASP spin on filter range is a cost effective method of extracting contaminate from fuel.

 

The filters range from a rated flow of 11 litres per minute upwards and can be supplied with paper filters for staining or glass filters for emulsified water removal. For fine cleaning, the range also offers a 3 micron straining filter and head with a high flow rate.

In heavy-duty filtration, the efficiency of the filter is the key to protecting the engine. Analysis of fuel from heavy-duty diesel engines has shown that about 90% of the particles that can harm an engine have a size between 5 and 15 Micron.

Unequalled by any traditional filter media, WASP spin on filters performs at least twice as efficiently as cellulose and delivers almost 100% filtration efficiency for this range of particles. While other filter medias are made of cellulose or glass fibres, the WASP emulsified water removal system is a composite of bonded layers of synthetic filter media.

Available as either high or medium flow models.

SUITABLE FORSUITABLE FOR

Diesel and heating oil

FUEL PROTECTIONFUEL PROTECTION

Ideal for Marine, Industrial and Transport applications.

FUEL FLOW OPTIONSFUEL FLOW OPTIONS

Up to 6000 lit/hr (100lit/min)

FILTERING OPTIONSFILTERING OPTIONS

3-30 Micron

 

  • Low cost, high performance diesel/MDO fuel filter/water separator.
  • For fuel flow rates up to 6000 litres per hour (100 litres per minute)
 

High Flow Range Overview

Part numbers

W-13904380 - 1.25” BSP 2 port head, 1.75bar bypass
W-11285 (R) - Water absorption media filter / water stop fuel filter
W-16776/6000 (R) - 3 micron fine filter
W-16778/6000 (R) - 10 micron filter
W-16780/6000 (R) - 12 micron filter
W-16721/6000 (R) - 30 micron filter
W-139800MR - Pressure gauge for W-13904380 head

Medium Flow Overview

Part Numbers
W-3302367 - Filter head, 7/8" ports
W-1013/680 (R) - Emulsified water removal filter

UNDER CONSTRUCTION

High Flow Range Overview

Low cost, high performance diesel/MDO fuel filter/water separator. For fuel flow rates up to 6000 litres per hour (100 litres per minute)

Specification

  • Flow rate: 6000 lit/hr
  • Type: Water absorption or absolute filtration
  • Head Port size: 1.25” BSP female
  • Head by-pass: 1.75bar bypass built in (element service point)
  • Head mounting holes: 2x M8x1.25 female
  • Optional gauge: 0-30PSI / 0-2Bar pressure gauge, part number W-139800MR (screws to 1/8”BSP port on head side)

Medium Flow Overview
Low cost, high performance diesel/MDO fuel filter/water separator. For fuel flow rates up to 300 litres per hour. Free and emulsified water removal. Integrated metal water drain.

Specification

  • Flow rate: 680 lit/hr
  • Micron: 10 micron
  • Type: Water removal (both free and emulsified) c/w water drain valve
  • Port size: 7/8"-14UNF (fittings available to BSP and metric sizes on request)
  • Head by-pass: n/a

 UNDER CONSTRUCTION

TOP