W-PFS Premium Fuel Cleaning Range
The W-PFS range is our most versatile and therefore most popular system for cleaning stored fuel and thus protecting your engine or generator by removing emulsified water, free water and particulate to 2 micron.
The standard units start at 8 lit/min and to a maximum of 400 lit/min, with our largest custom built unit being able to handle up to 1600 lit/min (that's nearly 100,000 litres per hour).
Systems typically have manual, automatic (programmable timer) and BMS control as standard via our user friendly touchscreen control system. They are self pumping and self monitoring fuel cleaning devices which are typically installed near to your fuel tanks. We also offer portable systems, units in IP rated enclosures, and frame mounted units and field bus communication options. The PFS range can be custom built to your specifications and we have a wide range of add-on options to meet all your needs.
If you are looking for a simpler, cost effective solution filtering to ,10 micron, we recommend the WB Range .
SUITABLE FOR
Tank sizes 7,500 to 1,000,000 litres Cleaning 8-400 litres per minute.
TOUCH SCREEN CONTROL
Easy to use, manual and auto set up, BMS, reporting and trending, export data, Ethernet desktop sharing and much more.
CLEAN TO 2 MICRON
Including removal of emulsified and free water, bacteria, dirt, and particulate.
FUEL PROTECTION
For data centres, generators, hospitals, agricultural tanks, government, embassies..
-
10 lit/min fuel polishing
10 lit/min fuel polishing
-
10 lit/min in enclosure
10 lit/min in enclosure
-
10 lit/min trolley
10 lit/min trolley
-
10 lit/min frame mounted
10 lit/min frame mounted
-
Colour touchscreen included
Colour touchscreen included
-
14 lit/min fuel polishing
14 lit/min fuel polishing
-
Fuel Conditioner
Fuel Conditioner
-
26 lit/min multiple tank cleaning
26 lit/min multiple tank cleaning
-
40 lit/min Multi-tank and dosing
40 lit/min Multi-tank and dosing
-
40 lit/min remove water and bacteria
40 lit/min remove water and bacteria
-
Best quality fittings
Best quality fittings
-
Add-on: Drip Tray
Add-on: Drip Tray
-
Add-on: Modbus
Add-on: Modbus
-
Installed system
Installed system
-
Add-on: Heater /cooler option
Add-on: Heater /cooler option
-
240 lit/min custom build
240 lit/min custom build
-
Installation example
Installation example
-
Water contamination
Water contamination
-
Example Installation
Example Installation
-
10 lit/min with dosing and autodrain
10 lit/min with dosing and autodrain
-
40 lit/min enclosure
40 lit/min enclosure
-
40 lit/min with dosing and multitank
40 lit/min with dosing and multitank
-
26 lit/min with biocide dosing
26 lit/min with biocide dosing
https://www.wasp-pfs.com/products/fuel-polishing-systems/w-pfs#sigProId57c22a9cb6
| Model | W-PFS-008 |
| Max flow rate | 8 lit/min max fuel flow rate ** |
|
Recommended Tank size (litres) |
0-10,000 |
| Power options |
12v DC 24v DC |
| Finish options |
Wall Mounted, Frame Mounted, Enclosure, Trolley |
| Particulate removal to | 2 Micron |
| Control unit |
Touch screen - 24vDC PLC - 12vDC |
| BMS (Building Management Systems) Outputs | 6 |
| BMS Inputs | 2 |
| Fuse |
12vDC 5a 24vDC 3a |
| Typical current |
12vDC 5a 24vDC 3a |
| Suction capability | 5m vertical, we always recommend using a non return valve and priming the unit before use. |
| Port sizes | 3/4" BSP |
| Pump Body | Steel |
| Gears | PTFE Vane |
| Shaft | Stainless steel |
| Seal | Flouoroelastomer |
|
Dimensions * |
700x700x250mm |
| Weight * | 18kg approx |
*Measurements are approx
**Flow rates quoted assume the ideal conditions, a large positive head, no left, wide pipe work, etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.
| Model | W-PFS-010 |
| Max flow rate | 10 lit/min max fuel flow rate ** |
|
Recommended Tank size (litres) |
0-12,500 |
| Power options |
220v 50hz 1ph AC |
| Finish options |
Wall Mounted, Frame Mounted, Enclosure, Trolley |
| Particulate removal to | 2 Micron |
| Control unit | Touch screen |
| BMS (Building Management Systems) Outputs | 6 |
| BMS Inputs | 2 |
| Fuse |
1a |
| Typical current |
1a |
| Suction capability | 5m vertical, we always recommend using a non return valve and priming the unit before use. |
| Port sizes | 3/4" BSP-P |
| Pump Body | Steel |
| Gears | PTFE Gear |
| Shaft | 316 Stainless steel |
| Seal | Flouoroelastomer |
|
Dimensions * |
700x700x350mm |
| Weight * |
21kg approx |
*Measurements are approx
**Flow rates quoted assume the ideal conditions, a large positive head, no left, wide pipe work, etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.
| Model | W-PFS-014 |
| Max flow rate | 14 lit/min max fuel flow rate ** |
|
Recommended Tank size (litres) |
7,500-20,000 |
| Power options |
12vDC 24v DC |
| Finish options |
Wall Mounted, Frame Mounted, Enclosure, Trolley |
| Particulate removal to | 2 Micron |
| Control unit |
Touch screen - 24vDC PLC - 12vDC |
| BMS (Building Management Systems) Outputs | 6 |
| BMS Inputs | 2 |
| Fuse |
12vDC 10a 24vDC 5a |
| Typical current |
12vDC 9a 24vDC 4a |
| Suction capability | 5m vertical, we always recommend using a non return valve and priming the unit before use. |
| Port sizes | 3/4" BSP-P |
| Pump Body | Steel |
| Gears | PTFE Gear |
| Shaft | 316 Stainless steel |
| Seal | Flouoroelastomer |
|
Dimensions * |
700x700x250mm |
| Weight * | 19-31kg approx |
*Measurements are approx
**Flow rates quoted assume the ideal conditions, a large positive head, no left, wide pipe work, etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.
| Model | W-PFS-026 |
| Max flow rate | 26 lit/min max fuel flow rate ** |
|
Recommended Tank size (litres) |
10,000 - 30,000 |
| Power options |
220v 50hz 1ph AC 12vDC 24v DC |
| Finish options |
Wall Mounted, Frame Mounted, Enclosure, Trolley |
| Particulate removal to | 2 Micron |
| Control unit |
Touch screen - 24vDC. 220vac PLC - 12vDC |
| BMS (Building Management Systems) Outputs | 6 |
| BMS Inputs | 2 |
| Fuse |
220vAC 3a 12vDC 15a 24vDC 8a |
| Typical current |
220vAC 3a 12vDC 12a 24vDC 5a |
| Suction capability | 5m vertical, we always recommend using a non return valve and priming the unit before use. |
| Port sizes | 1" BSP-P Male |
| Pump Body | Steel |
| Gears | PTFE Gear |
| Shaft | Stainless steel |
| Seal | Flouoroelastomer |
|
Dimensions * |
1000x800x300mm |
| Weight * |
42KG approx |
*Measurements are approx
**Flow rates quoted assume the ideal conditions, a large positive head, no left, wide pipe work, etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.
| Model | W-PFS-040 |
| Max flow rate | 40 lit/min max fuel flow rate ** |
|
Recommended Tank size (litres) |
Up to 50,000 |
| Power options |
220v 50hz 1ph AC 24v DC |
| Finish options |
Wall Mounted, Frame Mounted, Enclosure, Trolley |
| Particulate removal to | 2 Micron |
| Control unit | Touch screen |
| BMS (Building Management Systems) Outputs | 6 |
| BMS Inputs | 2 |
| Fuse |
220vAC 3a 24vDC 15a |
| Typical current |
220vAC 2a 24vDC 11a |
| Suction capability | 5m vertical, we always recommend using a non return valve and priming the unit before use. |
| Port sizes | 1" BSP-P Male |
| Pump Body | Steel |
| Gears | PTFE Gear |
| Shaft | Stainless steel |
| Seal | Flouoroelastomer |
|
Dimensions * |
1000x1000x450mm |
| Weight * | 65KG |
*Measurements are approx
**Flow rates quoted assume the ideal conditions, a large positive head, no left, wide pipe work, etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.
| Model | W-PFS-060 |
| Max flow rate | 60 lit/min max fuel flow rate ** |
|
Recommended Tank size (litres) |
Up to 100,000 |
| Power options | 220v 50hz 1ph AC |
| Finish options | Wall Mounted, Frame Mounted, Enclosure |
| Particulate removal to | 2 Micron |
| Control unit | Touch screen |
| BMS (Building Management Systems) Outputs | 6 |
| BMS Inputs | 2 |
| Fuse | 4a |
| Typical current | 3a |
| Suction capability | 5m vertical, we always recommend using a non return valve and priming the unit before use. |
| Port sizes | 1 1/2" BSP-P |
| Pump Body | Steel |
| Gears | Sliding Vane |
| Shaft | Stainless steel |
| Seal | Flouoroelastomer |
|
Dimensions * |
1100x800x450mm |
| Weight * | 75KG approx |
*Measurements are approx
**Flow rates quoted assume the ideal conditions, a large positive head, no left, wide pipe work, etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.
| Model | W-PFS-120 |
| Max flow rate | 120 lit/min max fuel flow rate |
|
Recommended Tank size (litres) |
Up to 200,000 |
| Power options | 220v 50hz 1ph AC |
| Finish options |
Frame Mounted, Enclosure |
| Particulate removal to | 2 Micron |
| Control unit | Touch screen |
| BMS (Building Management Systems) Outputs | 6 |
| BMS Inputs | 2 |
| Fuse | 5a |
| Typical current | 5a |
| Suction capability | 5m vertical, we always recommend using a non return valve and priming the unit before use. |
| Port sizes | 2" BSP |
| Pump Body | Stainless steel |
| Gears | Stainless steel |
| Shaft | Stainless steel |
| Seal | Flouoroelastomer |
|
Dimensions * |
1750x1500x1200mm |
| Weight * | 245KG |
*Measurements are approx
**Flow rates quoted assume the ideal conditions, a large positive head, no left, wide pipe work, etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.
| Model | W-PFS-240 |
| Max flow rate | 240 lit/min max fuel flow rate** |
|
Recommended Tank size (litres) |
Up to 500,000 |
| Power options | 220v 50hz 1ph AC |
| Finish options |
Frame Mounted, Enclosure |
| Particulate removal to | 2 Micron |
| Control unit | Touch screen |
| BMS (Building Management Systems) Outputs | 6 |
| BMS Inputs | 2 |
| Fuse | 10a |
| Typical current | 9a |
| Suction capability | 5m vertical, we always recommend using a non return valve and priming the unit before use. |
| Port sizes | 2" BSP |
| Pump Body | Stainless steel |
| Gears | Stainless steel |
| Shaft | Stainless steel |
| Seal | Flouoroelastomer |
|
Dimensions * |
2000x1500x1800mm |
| Weight * | 450KG |
*Measurements are approx
**Flow rates quoted assume the ideal conditions, a large positive head, no left, wide pipe work, etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.
Need help selecting the ideal unit?
Try our helpful new PRODUCT SELECTOR
For more technical information, please see the Technical Details tab.
Add-on Options W-PFS-008 PREMIUM WB FUEL CLEANING RANGE PRODUCT SELECTOR
CLEANING SPEED
From 8 lit/min - 240 lit/min
POWER
12vDC, 24v DC or 220v AC?
ADD-ONS
Need a drip tray, multi-tank cleaning, MODBUS, heating, cooling....
WOULD YOU LIKE TO COMPARE THE FEATURES OF THE WB AND THE W-PFS RANGE?
See our early to read comparision chart to ensure your required features are included in your choice
