phone  

CONTACT US

TEL: + 44 (0)1923 606 600

This email address is being protected from spambots. You need JavaScript enabled to view it.

 

 

home  

OPENING HOURS

Mon-Fri 08:30 - 17:00

 

 

 

W-PFS-240 Premium Fuel Cleaning System

 

240 litres per minute fuel polishing system, cleaning fuel to 2 micron, removing both free and emulsified water, bacteria and particulate.

This frame mounted 220v AC unit can be custom built to your specifications and offers medium to high flow fuel cleaning with manual, automatic and BMS control. Complete monitoring is at your finger tips with our user friendly colour touch screen control system.

SUITABLE FORSUITABLE FOR

Tank sizes 175,000 to 500,000 litres, cleaning 240 litres per minute. Available in 220vAC.

TOUCH SCREEN CONTROLTOUCH SCREEN CONTROL

Easy to use, manual and auto set up, BMS, reporting and trending, export data, Ethernet desktop sharing and much more.

CLEAN TO 2 MICRONCLEAN TO 2 MICRON

Including removal of emulsified and free water, bacteria, dirt, and particulate.

FUEL PROTECTIONFUEL PROTECTION

For data centres, generators, hospitals, marine, agricultural tanks, banking, government, embassies..

Try our helpful new PRODUCT SELECTOR to select the model for your needs.

View the embedded image gallery online at:
http://www.wasp-pfs.com/products/w-pfs/w-pfs-240#sigProId3f97279c4d
  • Advanced, high speed 220v AC system, providing full control system and monitoring
  • Manual, Automatic (timer) and BMS control system
  • Fuel conditioning stage for anti-bacterial action, eliminates the build-up of algae and water in your tanks
  • Patented centrifugal removal process
  • Recirculation or transfer action
  • Service filter alarm
  • Water in fuel alarm
  • Differential alarm
  • 99.9 % free water removal in a single pass
  • 99 % emulsified water removal in a single pass
  • 2 micron final polish/fuel cleaning

This email address is being protected from spambots. You need JavaScript enabled to view it.

  under-construction
 

Frame with or
without enclosure

W-PFS-240 240 lit/min

Power Option

 

220v 50hz 1ph AC

See the complete W-PFS Fuel Polishing Range

Need help selecting the right system for your requirements? Use our new Product Selector.

For more technical information, please see the Technical Details tab.

We offer a range of customisation options including:

  • Portable units, stair climbing trolley unit, weather proof casing, towing unit
  • Absolute Polishing ™, fuel cleaning to 0.5 micron
  • Dosing add on for automatic dosing of fuel additives
  • WASP Connect™, remote monitoring and controlling of your systems, wherever they are in the world
  • Particulate counter to ISO4406 with computer readout function
  • Automatic priming pumps
  • Manual priming pumps
  • Automatic water drains
  • Mobile phone, email, internet connectivity
  • Drip trays
  • Automatic changeover systems (multiple tank cleaning from a simple unit)
  • Modbus BMS
  • Other field bus BMS options
View the embedded image gallery online at:
http://www.wasp-pfs.com/products/w-pfs/w-pfs-240#sigProIdc18c3630e6

 

Model W-PFS-240
Flow rate up to 240 lit/min
Recommended tank size Up to 500,000 litres
Power options

220v 50hz 1ph AC

Finish options

Frame with or without enclosure

Particulate removal to 2 Micron
Control unit Colour touchscreen
BMS outputs 6
BMS inputs 2
Fuse  10a
Typical current  9a
Suction capability 1.5m vertical lift, over 5m with non-return valve fitted and when primed
Port sizes  2" BSP-P
Pump body Stainless Steel
Pump type Stainless Steel
Shaft Stainless steel  
Seal Flouoroelastomer
Dimensions *

 2000x1500x1800mm

Weight *

450KG 

* Measurements above are for the wall mounted version. Please enquire for weights and dimensions for alternative finishes.

 

w-pfs-installation-diagram

  • Ensure the system is securely fastened to a wall or other suitable solid structure.

  • The unit should have unique pipe work from any existing fuel driven equipment. The input to the WASP system should feed from the bottom of the fuel tank (via a ball valve and a foot valve or non return valve)

  • The system should pick-up fuel from the lowest point of the tank at one end, (below the level of the fuel feed to your engine) and ideally return it to the highest point at the opposite end.

  • The output should return to the tank at the top, opposite end to the input ideally.
  • The unit can be controlled via BMS, however it is capable of self operation and monitoring.
  • System must be primed before use and operation. It must also be primed after servicing; although with the aforementioned foot or non return valve installed, priming should only need to be done once after installation.
  • With power applied, please ensure the system’s time and date have been correctly set.
  • We recommend an internal pipe diameter of 3/4” for the 010 model and 1” for the others; however larger diameters will assist the unit as this reduces the frictional losses. Small diameters, long pipe runs or many bends in the pipe work will cause high frictional losses and cause the system to run slower than its maximum speed, or in extreme cases cause it to stop. Likewise high fuel lifts or fuel heads will also cause the unit to run slower.
  • In any typical fuel tank, the pipe feeding fuel to the engine is not at the bottom, however to successfully clean fuel, the pickup pipe going to the WB unit should be right at the bottom of the tank, below the engine feed.

 

 

This email address is being protected from spambots. You need JavaScript enabled to view it. W-PFS-026 Gallery Product Selector Widget Case Studies PDF W-PFS PRODUCT RANGE 

 

Tags: Fuel Tank Size: 110,001 litres and abovePower Options: 220v ACInstallation: Frame Mounted

Choosing your ideal system..

is easy as 1, 2, 3

 

Need help? Contact us

CLEANING SPEED

CLEANING SPEED

From 8 lit/min - 240 lit/min

POWER

POWER

12vDC, 24v DC or 220v AC?

ADD-ONS

ADD-ONS

Need a drip tray, multi-tank cleaning, MODBUS, heating, cooling....

TOP