phone  

CONTACT US

TEL: + 44 (0)1923 606 600

This email address is being protected from spambots. You need JavaScript enabled to view it.

 

 

home  

OPENING HOURS

Mon-Fri 08:30 - 17:00

 

 

 

W-PFS-040 Premium Fuel Cleaning System

 

40 litres per minute fuel polishing system, cleaning fuel to 2 micron, removing both free and emulsified water, bacteria and particulate.

This 220v AC or 24v DC unit is available in a range of finishes including wall mounted, enclosure, frame and portable trolley.

Our PFS range can be custom built to your specifications and offers medium to high flow fuel cleaning with manual, automatic and BMS control. Complete monitoring is at your finger tips with our user friendly colour touch screen control system. The PFS range can be custom built to your specifications and we have a wide range of add-on options to meet all your needs.

SUITABLE FORSUITABLE FOR

Tank sizes 25,000 to 50,000 litres, cleaning 40 litres per minute. Available in 220vAC, 24vDC or 220vAC.

TOUCH SCREEN CONTROLTOUCH SCREEN CONTROL

Easy to use, manual and auto set up, BMS, reporting and trending, export data, Ethernet desktop sharing and much more.

CLEAN TO 2 MICRONCLEAN TO 2 MICRON

Including removal of emulsified and free water, bacteria, dirt, and particulate.

FUEL PROTECTIONFUEL PROTECTION

For data centres, generators, hospitals, marine, agricultural tanks, banking, government, embassies..

Try our helpful new PRODUCT SELECTOR to select the model for your needs.

View the embedded image gallery online at:
http://www.wasp-pfs.com/products/w-pfs/w-pfs-040#sigProId10e76388a2
  • Advanced, high speed 220v AC or 24v DC system, providing full control system and monitoring
  • Manual, Automatic (timer) and BMS control system
  • Fuel conditioning stage for anti-bacterial action, eliminates the build-up of algae and water in your tanks
  • Patented centrifugal removal process
  • Recirculation or transfer action
  • Service filter alarm
  • Water in fuel alarm
  • Differential alarm
  • 99.9 % free water removal in a single pass
  • 99 % emulsified water removal in a single pass
  • 2 micron final polish/fuel cleaning
  • Add-on options available

This email address is being protected from spambots. You need JavaScript enabled to view it.

  W-PFS-026-W W-PFS-026-W-220vac-ENC  w-pfs-026-f-22vac-3t W-PFS-010-P-220
 

Wall Mounted

Enclosure

Frame with or
without enclosure

Portable

W-PFS-040 40 lit/min

Power Options

 

24v DC

220v 50hz 1ph AC

 

24v DC

220v 50hz 1ph AC

 

220v 50hz 1ph AC

 

220v 50hz 1ph AC

See the complete W-PFS Fuel Polishing Range

Need help selecting the right system for your requirements? Use our new Product Selector.

For more technical information, please see the Technical Details tab.

 

Model

W-PFS-040

220vac

W-PFS-040

24vDC

Flow rate up to 40 lit/min up to 40 lit/min
Recommended tank size Up to 50,000 litres Up to 50,000 litres
Power options

220v 50hz 1ph AC

24vDC

Finish options

Wall Mounted, Enclosure, Frame,  Trolley

Wall Mounted, Enclosure, Frame,  Trolley

Particulate removal to 2 Micron 2 Micron
Control unit Colour touchscreen Colour touchscreen
BMS outputs 6 6
BMS inputs 2 2
Fuse  3a 15a
Typical current 2a 11a
Suction capability 1.5m vertical lift, over 5m with non-return valve fitted and when primed 1.5m vertical lift, over 5m with non-return valve fitted and when primed
Port sizes 1" BSP-P 1" BSP-P
Pump body Steel   Steel
Pump Type PTFE Gear PTFE Gear
Shaft Stainless steel   Stainless Steel
Seal Flouoroelastomer Flouoroelastomer
Dimensions *

1000x1000x450mm

1000x1000x450mm

Weight *

61KG approx

65KG

* Measurements above are for the wall mounted version. Please enquire for weights and dimensions for alternative finishes.

 

w-pfs-installation-diagram

  • Ensure the system is securely fastened to a wall or other suitable solid structure.

  • The unit should have unique pipe work from any existing fuel driven equipment. The input to the WASP system should feed from the bottom of the fuel tank (via a ball valve and a foot valve or non return valve)

  • The system should pick-up fuel from the lowest point of the tank at one end, (below the level of the fuel feed to your engine) and ideally return it to the highest point at the opposite end.

  • The output should return to the tank at the top, opposite end to the input ideally.
  • The unit can be controlled via BMS, however it is capable of self operation and monitoring.
  • System must be primed before use and operation. It must also be primed after servicing; although with the aforementioned foot or non return valve installed, priming should only need to be done once after installation.
  • With power applied, please ensure the system’s time and date have been correctly set.
  • We recommend an internal pipe diameter of 3/4” for the 010 model and 1” for the others; however larger diameters will assist the unit as this reduces the frictional losses. Small diameters, long pipe runs or many bends in the pipe work will cause high frictional losses and cause the system to run slower than its maximum speed, or in extreme cases cause it to stop. Likewise high fuel lifts or fuel heads will also cause the unit to run slower.
  • In any typical fuel tank, the pipe feeding fuel to the engine is not at the bottom, however to successfully clean fuel, the pickup pipe going to the WB unit should be right at the bottom of the tank, below the engine feed.

 
 

 

Add-on Options This email address is being protected from spambots. You need JavaScript enabled to view it. W-PFS-060 Gallery Product Selector Widget Case Studies PDF W-PFS PRODUCT RANGE 

 

 

Tags: Fuel Tank Size: 30,001 to 40,000 litresPower Options: 24v DCPower Options: 220v ACInstallation: Wall MountedInstallation: EnclosureInstallation: Portable (ie trolley, tow)Installation: Frame Mounted

Choosing your ideal system..

is easy as 1, 2, 3

 

Need help? Contact us

CLEANING SPEED

CLEANING SPEED

From 8 lit/min - 240 lit/min

POWER

POWER

12vDC, 24v DC or 220v AC?

ADD-ONS

ADD-ONS

Need a drip tray, multi-tank cleaning, MODBUS, heating, cooling....

TOP