phone  

CONTACT US

TEL: + 44 (0)1923 606 600

This email address is being protected from spambots. You need JavaScript enabled to view it.

 

 

home  

OPENING HOURS

Mon-Fri 08:30 - 17:00

 

 

 

WB-40 Classic Fuel Cleaning System

40 litres per minute fuel polishing system, cleaning fuel to 10 micron, removing both free water, bacteria and particulate.

Fuel infection from water or other foreign matter can damage or destroy an engine, so maintaining  fuel quality is vital.

The WB range of Fuel Cleaning Systems offer a fuel cleaning solution with many of the features of the W-PFS range but is the more cost effective solution. These quality systems will clean your fuel automatically, removing water, bacterial infection, sludge solid and semi-solid contaminates from your fuel up to 10 micron.

Available in either 220v 50hz 1ph AC, 24v DC or 12v DC

If you require touch screen technology, BMS and field bus functionality, emulsified water removal and filtering to 2 micron, we recommend the W-PFS Range.

 

SUITABLE FORSUITABLE FOR

Tank sizes 25,000 to 50,000 litres Cleaning 40 litres per minute

FUEL PROTECTIONFUEL PROTECTION

For marine, generators, yachts and boating, hospitals, agricultural tanks etc

PLC CONTROLPLC CONTROL

Manual and auto set up options. AC and DC power options.

CLEAN TO 10 MICRONCLEAN TO 10 MICRON

including free water, bacteria, dirt and particulate.

Try our helpful new PRODUCT SELECTOR to select the model for your needs.

 

View the embedded image gallery online at:
http://www.wasp-pfs.com/products/wb-range/wb-40#sigProId229cfc0e27
  • Free water, dirt, particulate and bacteria removal to 10 micron
  • Advanced fuel filter/water separation technology
  • 5 stage centrifugal filtration process (see more)
  • 40 litres per minute flow rate
  • ideal for 25,000 - 50,000 litre fuel tanks
  • 220v 50hz 1ph AC or 24v DC
  • 1 x BMS Output 2 x BMS Inputs
  • Mounting options include wall mounting, mild steel enclosure or portable trolley
  • Automatic shutdown when servicing is required
  • Manual and Automatic modes
  • Simple remote monitoring

This email address is being protected from spambots. You need JavaScript enabled to view it.

 

  wb 10 wasp fuel cleaning system   wb 10 220 enclosed fuel cleaning system   wb 10 220 portable fuel cleaning unit
 

Wall Mounted Models

 

Mild Steel Enclosure Models

 

Portable Models

WB-40 40 lit/min

Power Options

 

24v DC,
220v 50hz 1ph AC

 

 

24v DC,
220v 50hz 1ph AC

 

 

24v DC,
220v 50hz 1ph AC

Need help selecting the right system for your requirements? Use our new Product Selector.

For more technical information, please see the Technical Details tab.

We offer a range of customisation options including:

  • Enclosures (IP54 and higher cabinets, to allow for external mounting)  
  • Powdered Mild Steel Enclosure
  • Portable/trolley based systems
  • White wall mountable bases as opposed to our standard blue
  • Stainless steel enclosure (rust proof)
  • Beacons/sounders on service requirement
  • Drip tray
View the embedded image gallery online at:
http://www.wasp-pfs.com/products/wb-range/wb-40#sigProId4e32e4b695
Model WB-40
Flow rate   up to 40 lit/min

Recommended Tank size

25,000 - 50,000
Power options

 220v 50hz 1ph AC

24v DC

Finish options Wall Mounted, Frame Mounted, Enclosure, Trolley
Particulate removal to 10 Micron
Control unit PLC
BMS Outputs 1
BMS Inputs 2
Fuse

220vAC 5a

24vDC 11a

Typical current

220vAC 1a

24vDC 8a

Suction capability  5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes  1"BSP-P male
Pump Body Brass  
Gears Stainless steel or bronze vane
Shaft Stainless steel  
Seal Flouoroelastomer lip seal  

Dimensions *

600x900x350mm
Weight *

26kg approx (AC)

29kg approx (DC)

*Please note, the dimensions, weights above are for the wall mounted version. The enclosure revision will be slightly larger and heavier. 

wb-installation-diagram-2

The WB range of products is typically wall mountable and should be installed close to the fuel tank it is cleaning.

In any typical fuel tank, the pipe feeding fuel to the engine is not at the bottom, however to successfully clean fuel, the pickup pipe going to the WB unit should be right at the bottom of the tank, below the engine feed.

The return pipe from the WB unit should ideally be at the top of the tank at the opposite end to the pick up; if this is not possible the top of the tank at the same end is acceptable.

Apart from that, the list below highlights our recommendations.

  • A fused spur is required to power the system (24v DC or 220v 50hz 1ph AC).
  • Only two pipes are required (input/pickup and output/return)
  • We recommend a non return valve on the input pipe
  • Alternatively we recommend a foot valve at the tank end of the input pipe
  • We recommend isolating ball valves before and after the system.

See the product support page for more information.

 

 

 

 

This email address is being protected from spambots. You need JavaScript enabled to view it. WB-10 WB-25 Gallery Product Selector Widget Case Studies

 

Tags: Fuel Tank Size: 30,001 to 40,000 litresPower Options: 24v DCPower Options: 220v ACInstallation: Wall MountedInstallation: EnclosureInstallation: Portable (ie trolley, tow)

Choosing your ideal system..

is easy as 1, 2, 3

 

Need help? Contact us

CLEANING SPEED

CLEANING SPEED

From 8 lit/min - 240 lit/min

POWER

POWER

12vDC, 24v DC or 220v AC?

ADD-ONS

ADD-ONS

Need a drip tray, multi-tank cleaning, MODBUS, heating, cooling....

TOP